diff -rupN orig/debian/changelog new/debian/changelog --- orig/debian/changelog 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/changelog 2013-06-07 10:38:04.066423802 +0200 @@ -0,0 +1,643 @@ +muttprint (0.73-4) unstable; urgency=low + + * remove obsolete debconf note (closes: #631303, #658505) + * run pod2man with --utf8 to fix german manpage encoding, + thanks Helge Kreutzmann (closes: #631117) + * update muttprint-manual.doc-base + + -- Rene Engelhard Fri, 10 Feb 2012 21:31:18 +0000 + +muttprint (0.73-3) unstable; urgency=low + + * 17_leave_tmp_dir.dpatch, also chdir() in the fatalError sub, thanks + martin krafft again (closes: #551543) + * suggest texlive-fonts-extra + + -- Rene Engelhard Wed, 15 Dec 2010 20:19:45 +0100 + +muttprint (0.73-2.1) unstable; urgency=low + + * Non-maintainer upload. + * Fix "cannot remove path when cwd is /tmp/muttprint*": new patch + 17_leave_tmp_dir.dpatch by martin krafft: change away from temp dir before + removing it (closes: #551543). + + -- gregor herrmann Sat, 27 Nov 2010 19:31:49 +0100 + +muttprint (0.73-2) unstable; urgency=low + + * upload to unstable + * add missing build-dep on docbook + * add Russian debconf templates translation (closes: #537366) + * move libtimedate-perl to recommends (closes: #419876) + + -- Rene Engelhard Fri, 14 Aug 2009 03:10:30 +0200 + +muttprint (0.73-1) experimental; urgency=low + + * new upstream release. + - expands ~ in TO_FILE (closes: #480853) + - fixes removal of e-mail sigs (closes: #431638) + * remove tetex-* from Depends: (closes: #475009) + * migrate from dbs to dpatch + * add build-dep on autoconf/automake1.9 since releases now have no + ./configure/Makefiles... pre-convert pics/ files to get pics/ build + working + * actually apply 03_fix_muttrc_changing_instructions and don't install + README.pics anymore + * debian/rules cleanup + + -- Rene Engelhard Mon, 29 Dec 2008 23:22:20 +0100 + +muttprint (0.72d-10) unstable; urgency=high + + * backport fix for 15_CVE-2008-5368 from upstrem (closes: #509487) + * fix up lintian warnings + + -- Rene Engelhard Thu, 25 Dec 2008 22:32:04 +0100 + +muttprint (0.72d-9) unstable; urgency=low + + * add galician debconf translation, thanks Jacobo Tarrio (closes: #414037) + + -- Rene Engelhard Mon, 12 Mar 2007 09:06:18 +0100 + +muttprint (0.72d-8) unstable; urgency=low + + * remove muttprint/utf8 debconf question, depend on perl (>= 5.8.0-16) + instead (closes: #388940) + + -- Rene Engelhard Sun, 24 Sep 2006 19:44:30 +0200 + +muttprint (0.72d-7) unstable; urgency=low + + * change depends to latex-ucs | texlive-latex-recommended, thanks + Magnus Therning (closes: #388201) + + -- Rene Engelhard Tue, 19 Sep 2006 11:08:11 +0200 + +muttprint (0.72d-6) unstable; urgency=low + + * Depend on tetex-ucs now since "Unicode locales *are* default [...] for + etch"... (closes: #262485) + * make Build-Depends-Indep Build-Depends: + * add pt debconf translation, thanks Rui Branco (closes: #381690) + * add updated sv debconf translation, thanks Daniel Nylander (closes: #350631) + + -- Rene Engelhard Mon, 11 Sep 2006 19:17:22 +0200 + +muttprint (0.72d-5) unstable; urgency=low + + * support texlive-* in muttprints Depends + + -- Rene Engelhard Mon, 23 Jan 2006 05:44:20 +0100 + +muttprint (0.72d-4) unstable; urgency=low + + * readd apparently lost patch to point to /usr/share/ospics for the images + instead of /usr/share/muttprint, thanks David Moreno Garza + * add sv po-debconf translation, thanks Daniel Nylander (closes: #340970) + + -- Rene Engelhard Sun, 22 Jan 2006 22:20:05 +0100 + +muttprint (0.72d-3) unstable; urgency=low + + * readd uncorrupted Debian.png from CVS (closes: #342277) + + -- Rene Engelhard Tue, 3 Jan 2006 10:51:23 +0100 + +muttprint (0.72d-2) unstable; urgency=low + + * lower slrn Recommends to Suggests. Remove versioned Recommends: on + perl which was only "necessary" for woody. Same with the versioned + tetex-extra Suggests (closes: #333608) + * fix typo in de.po, thanks Jens Seidel (closes: #313964) + * add vi.po, thanks Clytie Siddall (closes: #312993) + * s/apperently/apparently/, thanks Clytie Siddall (closes: #312994) + * fix bashism in config script + * Standards-Version: 3.6.2 (no changes needed) + + -- Rene Engelhard Thu, 13 Oct 2005 16:34:20 +0200 + +muttprint (0.72d-1) unstable; urgency=high + + * New micro upstream release + - only upstream maintainer change, spelling fixes + - disables MAINT_SEARCH (closes: #309892) + * add ja debconf translation, thanks Hideki Yamane (closes: #290143) + + -- Rene Engelhard Fri, 20 May 2005 17:12:44 +0200 + +muttprint (0.72c-2) unstable; urgency=low + + * add cs debconf translation, thanks Miroslav Kure (closes: #273710) + * add it debconf translation, thanks Luca Monducci (closes: #277840) + * don't mention we have HTML docs, we don't + * don't install sample-* into example/ anymore, therefore no symlinks + anymore (closes: #266655) + + -- Rene Engelhard Sat, 1 Jan 2005 03:00:55 +0100 + +muttprint (0.72c-1) unstable; urgency=low + + * New upstream release. + * update pt_BR debconf translation, thanks Andre Luis Lopes + (closes: #264224) + + -- Rene Engelhard Sun, 26 Dec 2004 23:24:24 +0100 + +muttprint (0.72a-3) unstable; urgency=low + + * add Build-Depends: on sharutils (closes: #249737) + + -- Rene Engelhard Wed, 19 May 2004 09:37:00 +0200 + +muttprint (0.72a-2) unstable; urgency=low + + * readd the .png versions of the images (except the b/w penguin) back + from upstream CVS, same with penguin.jpg; readd flipped BabyTux for png + since there imagemagick actually seems to work.... + + -- Rene Engelhard Sun, 16 May 2004 00:39:03 +0200 + +muttprint (0.72a-1) unstable; urgency=low + + * New upstream release. + * add updated fr.po, thanks Christian Perrier (closes: #245759) + * remove the .png, .jpg and flipped versions for now since + neither imagemagick nor gimp with script-fu work now on thwm *sigh* + + -- Rene Engelhard Sun, 25 Apr 2004 13:15:45 +0200 + +muttprint (0.72-3) unstable; urgency=low + + * remove the HTML stuff from doc-base and add the PDF stuff + (closes: #243073, #243160) + + -- Rene Engelhard Mon, 12 Apr 2004 16:11:11 +0200 + +muttprint (0.72-2) unstable; urgency=low + + * The "Ugh-now-I-remember why gs was in Build-Depends:" release. + + * readd gs to Build-Depends: (closes: #243134) + + -- Rene Engelhard Sun, 11 Apr 2004 14:08:24 +0200 + +muttprint (0.72-1) unstable; urgency=low + + * The "people interested in muttprint should read + http://muttprint.sourceforge.net/future.shtml and probably become new + upstream" release. + + * new upstream release + - does not choke on minimalistic mails anymore (closes: #241912) + * New patch to fix building the documentation; use -d to the db2* tools + disable html generation stuff though since that somehow doesn't work + -> only PDF for now + * add Build-Depends: on docbook-utils and clean up the rest + * Recommend perl (>= 5.8.1) + * Replace muttprint (<< 0.70-1) instead of Conflicts: (closes: #214957) + * converted changelog to UTF8 + * merge 0.71-7 + + -- Rene Engelhard Fri, 9 Apr 2004 22:01:05 +0200 + +muttprint (0.71+0.72pre6-1) experimental; urgency=low + + * CVS co (HEAD / 0.72pre6) + - handles utf8 right (closes: #200682, #200864) + * Depends: libtext-iconv-perl + * add dialog and perl (>= 5.8.0-16) to Suggests: + * temporarily back out 03_fix_muttrc_changing_instructions + * add debconf warning for people trying to install muttprint on systems + having perl (<< 5.8.0-16) and the possibility to have utf8 used is there + * Standards-Version: 3.6.1 + * enhance /etc/Muttprintrc with all possible variables; set to default + * remove CHARSET variable since it does not have an effect anymore... + + -- Rene Engelhard Fri, 17 Oct 2003 16:12:34 +0200 + +muttprint (0.71-7) unstable; urgency=low + + * add catalan debconf template translation; + thanks Aleix Badia i Bosch (closes: #236654) + + -- Rene Engelhard Sat, 13 Mar 2004 22:46:27 +0100 + +muttprint (0.71-6) unstable; urgency=low + + * add dutch debconf template translation - thanks + Tim Vandermeersch (closes: #209104) + * do not use | in Enhances: (closes: #204278) + + -- Rene Engelhard Tue, 7 Oct 2003 20:09:50 +0200 + +muttprint (0.71-5) unstable; urgency=low + + * add spanish debconf template translation - thanks + Carlos Alberto Martín Edo (closes: #201138) + * bump Standards-Version: to 3.6.0 + + -- Rene Engelhard Mon, 14 Jul 2003 18:56:22 +0200 + +muttprint (0.71-4) unstable; urgency=low + + * add brazlian potugese debconf template translation - thanks + Andre Luis Lopez (closes: #197517) + + -- Rene Engelhard Sun, 15 Jun 2003 20:20:06 +0200 + +muttprint (0.71-3) unstable; urgency=low + + * add french debconf template translation - thanks Christian Perrier + (closes: #195649) + + -- Rene Engelhard Sun, 8 Jun 2003 12:52:52 +0200 + +muttprint (0.71-2) unstable; urgency=low + + * add latex-ucs to Suggests: as it is now in Debian + * move psutils to Suggests: + (and add both package to Muttprintrc's comments..) + + -- Rene Engelhard Fri, 6 Jun 2003 18:43:10 +0200 + +muttprint (0.71-1) unstable; urgency=low + + * new upstream release. + * The compface feature actually needs imagemagick too, so + add imagemagick to Suggests: and the comment in /etc/Muttprintrc + + -- Rene Engelhard Tue, 27 May 2003 22:02:40 +0200 + +muttprint (0.70-2) unstable; urgency=low + + * fix muttprint's and muttprint-manual's description (closes: #191965) + + -- Rene Engelhard Mon, 5 May 2003 19:16:37 +0200 + +muttprint (0.70-1) unstable; urgency=low + + * new upstream release. + * ospics: since the new upstream tarball does not contain the *.png and + *.jpg images anymore, create them during build with convert; make + all images be available in all three formats + * removed unneeded Conflicts: in ospics package + * as the muttprint package itself now becomes bigger and bigger because + of the needed space of the manual, spit the manual out to + muttprint-manual, this reduces the main package of around 390 KB.. + + -- Rene Engelhard Sun, 27 Apr 2003 20:04:56 +0200 + +muttprint (0.64+0.70pre1-2) unstable; urgency=low + + * kill CVS dirs from debian/ *sigh* + + -- Rene Engelhard Sun, 20 Apr 2003 03:08:36 +0200 + +muttprint (0.64+0.70pre1-1) unstable; urgency=low + + * new upstream (pre-)version (CVS HEAD 2003-04-19) + - does not create /tmp/muttprint-geometry-ver anymore (closes: #180615) + - handles CHARSET="auto" (closes: #154554) + - CHARSET="auto" as default in /etc/Muttprintrc + - "unitialized value" perl warning fixed (closes: #175182) + - removed patch 09_translations_in_usr_share and the appropriate + snippet in rules as the files are moved to /usr/share upstream now. + - new: koi8-r support + - new: experimental utf8 support; do not write in the explanatory + comments in /etc/Muttprintrc until the needed latex-ucs is in Debian + * added suggestions: + - compface - needed for using the X-Face printing feature + - tetex-extra (>= 2.0-1) - koi8-r support needs tetex 2.x but + muttprint itself runs fine with older versions, so only suggest + * move mutt from Suggests: to Recommends: and recommend not only mutt; + recommend MUA's we know they (can) ouput plain text and mail-reader: + mutt | sylpheed | gnus | xfmail | exmh | mail-reader; do the same + with news-readers: slrn | news-reader + * Enhances: mutt, slrn im muttprint; Enhances: muttprint in ospics + * remove "of Mutt" from muttprint's short description as muttprint + can be used with many MUAs + * some formulation beautification/fixes on the "pictures moved" debconf + note + * write near the options in /etc/Muttprintrc which additional package + is needed (for the suggested packages) + * converted to po-debconf; Build-Depend: on debhelper (>= 4.1.16) + * Standards-Version: 3.5.9 + * debhelper compatibility level 4; use ${misc:Depends} + + -- Rene Engelhard Sat, 19 Apr 2003 19:08:47 +0200 + +muttprint (0.64-3) unstable; urgency=low + + * remove cruft from source package *sigh* + + -- Rene Engelhard Tue, 25 Mar 2003 22:24:01 +0100 + +muttprint (0.64-2) unstable; urgency=low + + * fix checking if we install new or upgrade from <= 0.63a in config + (closes: #174623) + + -- Rene Engelhard Sun, 29 Dec 2002 16:14:30 +0100 + +muttprint (0.64-1) unstable; urgency=low + + * new upstream version + - removed compat2 patch because upstream added a handler routine + determining which geometry.sty we're using and adding compat2 if + necessary or not + + -- Rene Engelhard Sun, 15 Dec 2002 21:22:27 +0100 + +muttprint (0.63a-6) unstable; urgency=low + + * geometry.sty changed heavily in the new tetex packages which + made printing the footer on each page not visible anymore... :( + Therefore added compat2 to the options of the \usepackage for + geometry.sty in /usr/bin/muttprint (closes: #172715) + * /etc/Muttprintrc: turn on rule before/after header/footer by default + * split the images out to extra 'ospics' package to let people install + them without installing tetex-extra + - added debconf note for people upgrading from an older version that + they have to install ospics additionally and change /usr/share/muttprint + to /usr/share/ospics + * fixed some lintian/linda warnings + * bumped Standards-Version: to 3.5.8 (no changes needed) + + -- Rene Engelhard Thu, 12 Dec 2002 23:47:52 +0100 + +muttprint (0.63a-5) unstable; urgency=low + + * Description: s/XFMail and PINE//, s/Netscape Messenger/Mozilla/ + and restructured the lines (closes: #170658) + * do not specify PAPER; let muttprint get that from /etc/papersize + (closes: #170821) + + -- Rene Engelhard Sat, 30 Nov 2002 12:00:50 +0100 + +muttprint (0.63a-4) unstable; urgency=low + + * added jadetex and gs to Build-Depends: (closes: #164979) + + -- Rene Engelhard Wed, 16 Oct 2002 12:27:16 +0200 + +muttprint (0.63a-3) unstable; urgency=low + + * do not install upstream changelog twice... + + -- Rene Engelhard Sun, 22 Sep 2002 09:18:28 +0200 + +muttprint (0.63a-2) unstable; urgency=low + + * Hrmpf, the current default settings do not work on all systems + (ppl have to modify /etc/Muttprintrc first) + So: + - disable any definition of PRINTER= in /etc/Muttprintrc + - set PRINT_COMMAND in /etc/muttprintc to just "lpr" + Thhis have the effect that the default printer of the current + print system is used; if anyone wants to configure anything other + he has to do it him-/herself.... The whole fixes closes: #161329) + + -- Rene Engelhard Wed, 18 Sep 2002 20:19:03 +0200 + +muttprint (0.63a-1) unstable; urgency=low + + * new upstream release. + - now using FONT="Latex" instead of FONT="Latex-bright" per default + in /etc/Muttprintrc -- Latex-bright isn't available in Debian + * removed patches that were introduced in 0.63-1 and -2 and became + obsolete by the new upstream release: + - 02_fix_html_generation + - 04_fix_paths_in_documentation + - 05_remove_shebang + - 06_remove_use_cwd + - 07_fix_duplex_printer + * debian/rules: changend the build; we now have to do a make clean in + doc/manpages and doc/manual and then to a make docdir=... sharedir=... + and so on in these directories + + -- Rene Engelhard Thu, 12 Sep 2002 03:59:30 +0200 + +muttprint (0.63-2) unstable; urgency=low + + * added patch from upstream to get DUPLEX="printer" to work again + Thanks, Bernhard (closes: #160312) + + -- Rene Engelhard Tue, 10 Sep 2002 19:47:32 +0200 + +muttprint (0.63-1) unstable; urgency=low + + * new upstream release + * moving to use dbs + * going back to only create html & pdf + * also provide "flipped" penguin (BabyTuX; the "normal" one doesn't + make sense) images, which has the effect that the penguin is looking + _to_ the mail, add imagemagick to Build-Depends-Indep: for that + (closes: #151135) + * fixed a lintian warning (remove #!/usr/bin/perl from translation-de.pl + as in the other translation-$(lang).pl files; these files are only for + using for inclusion from muttprint; not as scripts which should executed + standalone) + * add symlinks: /usr/share/doc/muttprint/sample-muttprintrc-$(lang) + to /usr/share/doc/muttprint/examples/sample-muttprintrc-$(lang). + This makes this path more like RedHat's one and makes it easier to ... + * ... change manual to point to the right location of documentation + We only have to point to two different locations, not three... + This change is only done for _de_ and _en_, I do not speak the other + languages (es/fr/it) good, so help there (send me patches) would be + appreciated... The changes for de and en are in patch + 04_fix_paths_in_documentation. + So this only partially closes: #159480 + * fixed "Subroutine main::getcwd redefined" warning + Thanks to Andreas Klapschus for the patch + (closes: #159774). + * bumped Standards-Version: to 3.5.7 + + -- Rene Engelhard Mon, 9 Sep 2002 07:34:07 +0200 + +muttprint (0.62b-3) unstable; urgency=low + + * after finding out how to fix the build failure at html generation, + reenable its generation and installation (indirectly closes: #137520) + + -- Rene Engelhard Fri, 30 Aug 2002 20:53:02 +0200 + +muttprint (0.62b-2) unstable; urgency=low + + * new maintainer (closes: #158475) + * fix error in manual (closes: #138205) + * fix typo in doc-base (closes: #137520) + * package now builds (closes: #142161) + - disabling html doc generation + - enabling generation of dvi and txt additional to the left pdf + - fixing Makefiles for manuals to only depend on default not on all + - do not copy manual-$(lang)/*, copy manual-$(lang)* + * removed double listing of /etc/Muttprintrc as conffile; one time is + enough :) + * do not install the pdf version of the manual twice + * add Suggests: to libtimedate-perl (closes: #145913) + + -- Rene Engelhard Wed, 28 Aug 2002 04:00:23 +0200 + +muttprint (0.62b-1) unstable; urgency=low + + * New upstream release. + + -- Chanop Silpa-Anan Mon, 25 Feb 2002 14:48:31 +1100 + +muttprint (0.61-3) unstable; urgency=low + + * Fix Build-Depends-Indep. (closes: #133720) + + -- Chanop Silpa-Anan Wed, 13 Feb 2002 23:34:22 +1100 + +muttprint (0.61-2) unstable; urgency=low + + * Fix docbase. + + -- Chanop Silpa-Anan Wed, 13 Feb 2002 08:50:01 +1100 + +muttprint (0.61-1) unstable; urgency=low + + * New upsteam release. + * Fix long package description. (closes: #131014) + + -- Chanop Silpa-Anan Wed, 13 Feb 2002 04:32:52 +1100 + +muttprint (0.60-2) unstable; urgency=low + + * Fix typos. (closes: #121539, #121535) + * Honour PRINTER environment. (closes: #121537) + + -- Chanop Silpa-Anan Thu, 29 Nov 2001 11:31:03 +1100 + +muttprint (0.60-1) unstable; urgency=low + + * New upstream release. (closes: #111233, #111235, #113760) + + -- Chanop Silpa-Anan Sun, 25 Nov 2001 22:53:45 +1100 + +muttprint (0.53a-1) unstable; urgency=low + + * New upstream release. (closes: #108063) + * The patch I sent to upsteam to close Bug#108063 only deals with + a4 and letter in /etc/papersize since the code in muttprint only + knows A4 and letter. Default fallback is A4 though. + + -- Chanop Silpa-Anan Mon, 13 Aug 2001 00:47:11 +1000 + +muttprint (0.52a-1) unstable; urgency=low + + * New upstream release. + * Use Standards-Version: 3.5.6 (woody ready) + + -- Chanop Silpa-Anan Thu, 2 Aug 2001 09:42:06 +1000 + +muttprint (0.51-1) unstable; urgency=low + + * New upstream release. + * Now support hardware duplexing with postscript printer. + + -- Chanop Silpa-Anan Wed, 11 Jul 2001 16:22:02 +1000 + +muttprint (0.50b-1) unstable; urgency=low + + * New upstream release. + * Remove procmail from dependency since upstream does not use it anymore. + * There are documents on how people should set muttrc (unignore date) + in the package from upstream. (closes: #91974) + + -- Chanop Silpa-Anan Thu, 5 Jul 2001 08:11:03 +1000 + +muttprint (0.50a-1) unstable; urgency=low + + * New upstream release. + * Fix one typo bug I found in 0.50. + + -- Chanop Silpa-Anan Tue, 3 Jul 2001 20:04:45 +1000 + +muttprint (0.50-1) unstable; urgency=low + + * New upstream release. + * Update debian/rules. + * Add dependency for perl. Since this version is rewritten in perl. + * Default the printer to "lp" + + -- Chanop Silpa-Anan Tue, 3 Jul 2001 16:40:26 +1000 + +muttprint (0.41-3) unstable; urgency=low + + * New maintainer; closes: #100246 + * Standards-Version 3.5.5. + + -- Chanop Silpa-Anan Fri, 15 Jun 2001 19:42:19 +1000 + +muttprint (0.41-2) unstable; urgency=low + + * Fixed an error in README; closes: #97588 + + -- Dr. Guenter Bechly Tue, 15 May 2001 19:38:43 +0200 + +muttprint (0.41-1) unstable; urgency=low + + * New upstream release. + * Updated Debian package internals. + + -- Dr. Guenter Bechly Sat, 12 May 2001 15:10:47 +0200 + +muttprint (0.40-3) unstable; urgency=low + + * Added dependency on procmail; closes: #94582 + + -- Dr. Guenter Bechly Fri, 20 Apr 2001 16:52:23 +0200 + +muttprint (0.40-2) unstable; urgency=low + + * Changed the default paper format from letter to A4 because A4 is + more widely used all over the world (except USA and Canada). + + -- Dr. Guenter Bechly Sun, 15 Apr 2001 15:05:36 +0200 + +muttprint (0.40-1) unstable; urgency=low + + * New upstream release. + * Changed defaults in sample-muttprintrc. + * Deleted Debian's own manpage, because it was incorporated by upstream into the + new release. + * Updated to latest standards version (changed control and rules). + + -- Dr. Guenter Bechly Wed, 11 Apr 2001 19:30:28 +0200 + +muttprint (0.30-2) unstable; urgency=low + + * Removed README.Debian and modified manpage. + + -- Dr. Guenter Bechly Wed, 28 Mar 2001 11:54:09 +0200 + +muttprint (0.30-1) unstable; urgency=low + + * New upstream release; closes: #89820 + * Corrected typo in README.Debian; closes: #89347 + * Corrected typo in copyright file. + * Adjusted sample-muttprintrc and Makefile for this new release. + * Adjusted the dependencies in control for this new release. + * Adjusted the manpage for this new release, and use of CUPS. + + -- Dr. Guenter Bechly Tue, 27 Mar 2001 10:48:07 +0200 + +muttprint (0.23-2) unstable; urgency=low + + * Corrected typo in description; closes: #88404. + + -- Dr. Guenter Bechly Sun, 4 Mar 2001 14:55:54 +0100 + +muttprint (0.23-1) unstable; urgency=low + + * Initial Release; closes: #88218 + * Added a Makefile. + * Wrote a manpage. + * Changed defaults in sample-muttprintrc. + + -- Dr. Guenter Bechly Tue, 27 Feb 2001 20:22:41 +0100 diff -rupN orig/debian/compat new/debian/compat --- orig/debian/compat 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/compat 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1 @@ +4 diff -rupN orig/debian/control new/debian/control --- orig/debian/control 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/control 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1,47 @@ +Source: muttprint +Section: mail +Priority: optional +Maintainer: Rene Engelhard +Build-Depends: debhelper (>= 4.1.16), dpatch, imagemagick, ghostscript, docbook-utils, sharutils, automake1.9, autoconf, docbook +Standards-Version: 3.6.2 + +Package: muttprint +Architecture: all +Depends: ${perl:Depends} (>= 5.8.0-16), ${misc:Depends}, texlive-latex-recommended, texlive-fonts-recommended, texlive-latex-extra, libtext-iconv-perl, latex-ucs | texlive-latex-recommended +Recommends: mutt | sylpheed | gnus | xfmail | exmh | mail-reader, libtimedate-perl +Suggests: ospics, compface, imagemagick, psutils, muttprint-manual, dialog, slrn | news-reader, texlive-fonts-extra +Enhances: mail-reader, news-reader +Description: Pretty printing of mails + Muttprint formats the printing of Mutt and other mail clients to be as + pretty as the printing of Mozilla or Kmail. + . + It can print a little penguin -- or the Debian logo -- on the first + page (suitable pictures can be found in the ospics package) and a headline + on every page. Furthermore, it only prints the most important headers, but + not the whole plethora of them. Finally, it can even print two pages on one + page in landscape format. + +Package: muttprint-manual +Architecture: all +Section: doc +Enhances: muttprint +Replaces: muttprint (<< 0.70-1) +Depends: lynx | www-browser | xpdf | pdf-viewer, ${misc:Depends} +Description: Manual for muttprint + Muttprint formats the printing of Mutt and other mail clients to be as + pretty as the printing of Mozilla or Kmail. + . + This package contains the manual. + +Package: ospics +Section: graphics +Architecture: all +Enhances: muttprint +Depends: ${misc:Depends} +Description: Some images of operating system logos/mascots + This package contains some operating system logos / mascots + . + It contains: + - Tux (black/white) + - "Baby Tux" (black/white and color) + - Debian swirl (black/white and color) diff -rupN orig/debian/copyright new/debian/copyright --- orig/debian/copyright 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/copyright 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1,17 @@ +This package was debianized by Dr. Guenter Bechly on +Tue, 27 Feb 2001 20:22:41 +0100. + +Currently maintained by René Engelhard +It was downloaded from http://muttprint.sourceforge.net/ + +Upstream Author: Lukas Ruf + +Copyright: + +Copyright (C) 2000-04 by Bernhard Walle +Copyright (c) 2005, Lukas Ruf + +You are free to distribute this software under the terms of +the GNU General Public Licence. +On Debian systems, the complete text of the GNU General Public +Licence can be found in /usr/share/common-licenses/GPL file. diff -rupN orig/debian/dirs new/debian/dirs --- orig/debian/dirs 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/dirs 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1 @@ +etc diff -rupN orig/debian/docs new/debian/docs --- orig/debian/docs 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/docs 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1 @@ +README.Gnus diff -rupN orig/debian/muttprint-manual.dirs new/debian/muttprint-manual.dirs --- orig/debian/muttprint-manual.dirs 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/muttprint-manual.dirs 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1 @@ +usr/share/doc/muttprint/manual diff -rupN orig/debian/muttprint-manual.doc-base new/debian/muttprint-manual.doc-base --- orig/debian/muttprint-manual.doc-base 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/muttprint-manual.doc-base 2013-06-07 10:38:04.069757118 +0200 @@ -0,0 +1,9 @@ +Document: muttprint +Title: Pretty Printing of mails with Mutt +Author: Bernhard Walle +Abstract: This manual describes how to use Muttprint in details. +Section: Typesetting + +Format: PDF +Files: /usr/share/doc/muttprint/manual/manual-en.pdf.gz + diff -rupN orig/debian/Muttprintrc new/debian/Muttprintrc --- orig/debian/Muttprintrc 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/Muttprintrc 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1,143 @@ +# MUTTPRINT configuration file +# +# ~/.muttprintrc or /etc/Muttprintrc + +# +# Here you can configure your printer +# To print in a file, use the following entry: +# PRINTER="TO_FILE:/home/berwal/test.ps" +#PRINTER="lp" + +# +# Here you can set the print command +# $PRINTER is substituted by the PRINTER +# variable +#PRINT_COMMAND="lpr -P$PRINTER" +PRINT_COMMAND="lpr" + +# +# Here you can set the path to the penguin image +PENGUIN="off" + +# +# Turn printing of X-Face picture on/off (on needs the packages compface +# and imagemagick) +XFACE="off" + +# +# Here you can turn the duplex print on or off. (needs psutils) +# Possible values are "off" or "on" +# +# For Postscript duplex printer set it to "printer" +DUPLEX="off" + +# +# Here you can turn on or off the paper save mode +# (printing 2 pages on 1 page) - needs psutils +# Set it to 'optional' if you only want papersave mode +# if more than one page is printed. +PAPERSAVE="off" + +# +# Here you can set the printing speed in seconds +# per page +SPEED="30" + +# +# Choose a font: +# - Latex (EC-Fonts) +# - Latex-bright (CM-bright) +# - Times +# - Utopia +# - Palatino +# - Charter +# - Bookman +FONT="Latex" + + +# +# Choose a style for the first page +# - plain no rules +# - border rule after the headers +# - fbox simple box around the mailheaders +# - shadowbox shadowbox around the header +# - ovalbox box with rounded corners around the header (thin lines) +# - Ovalbox same as "ovalbox" but thicker lines +# - doublebox box with double lines around the header +# - grey grey background behind the headers +# - greybox same as "grey" but with a additional black box +FRONTSTYLE="border" + +# +# Should there be a rule after the header (not first page) +HEADRULE="on" + +# +# Should there be a rule over the footer +FOOTRULE="on" + +# +# Choose a paper format, if not specified look in /etc/papersize +# - A4 +# - letter +#PAPER="A4" + +# +# prints no signatures +REM_SIG="off" +# how does a signature look like? +SIG_REGEXP="^-- $" + +# +# prints no quoting +REM_QUOTE="off" + +# +# Choose of the printed headers, separation with "_" +# /Header/ : italic printing +# *Header* : bold printing +# If the header does not exist, it is not printed. +PRINTED_HEADERS="Date_To_From_CC_Newsgroups_*Subject*" + +# +# Writes error messages of LaTeX and dvips to /tmp/muttprint.log +DEBUG="0" + +# +# Font size: 10pt, 11pt or 12pt +FONTSIZE="10pt" + +# +# Longest line +WRAPMARGIN="80" + +# margins +TOPMARGIN="19" +BOTTOMMARGIN="22" +LEFTMARGIN="20" +RIGHTMARGIN="20" + +# +# Date (format of printed date) +# original, local (needs Date::Parse from libtimedate-perl) +DATE="original" + +# +# Date format string (only if DATE=local) +# See strftime(3) for details +DATE_FORMAT="%c" + +# pass special options to the verbatim environment, see texdoc fancyvrvb +VERBATIMNORMAL="" +VERBATIMSIG="fontshape=it" + +# how should the address be printed out? +ADDRESSFORMAT="%r <%a>,\n" + +# own LaTeX code to be inserted +LATEXCODE="" +LATEXCODE1="" +LATEXCODE2="" +LATEXCODE3="" +LATEXCODE4="" +LATEXCODE5="" diff -rupN orig/debian/ospics.dirs new/debian/ospics.dirs --- orig/debian/ospics.dirs 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/ospics.dirs 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1 @@ +usr/share diff -rupN orig/debian/patches/00list new/debian/patches/00list --- orig/debian/patches/00list 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/00list 2013-06-07 10:38:04.076423748 +0200 @@ -0,0 +1,7 @@ +03_fix_muttrc_changing_instructions +11_right_docbook-utils_flags +12_no_html_docs +15_no_Gentoo +16_dont_install_README +17_leave_tmp_dir +18_pod2man_de_utf8 diff -rupN orig/debian/patches/03_fix_muttrc_changing_instructions.dpatch new/debian/patches/03_fix_muttrc_changing_instructions.dpatch --- orig/debian/patches/03_fix_muttrc_changing_instructions.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/03_fix_muttrc_changing_instructions.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,77 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 03_fix_muttrc_changing_instructions.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: fix up docs + +@DPATCH@ +diff -urNad muttprint-0.73~/doc/manual/de/manual-de.sgml muttprint-0.73/doc/manual/de/manual-de.sgml +--- muttprint-0.73~/doc/manual/de/manual-de.sgml 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/de/manual-de.sgml 2008-12-29 23:21:52.000000000 +0100 +@@ -312,8 +312,8 @@ + + + # Alle Header sollen an Muttprint �bergeben werden +-macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" +-macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" ++macro index p "<display-toggle-weed><print-message><display-toggle-weed><exit>" ++macro pager p "<display-toggle-weed><print-message><display-toggle-weed>" + + + Das Makro schaltet zunächst auf Anzeige aller Header um, +diff -urNad muttprint-0.73~/doc/manual/en/manual-en.sgml muttprint-0.73/doc/manual/en/manual-en.sgml +--- muttprint-0.73~/doc/manual/en/manual-en.sgml 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/en/manual-en.sgml 2008-12-29 23:21:52.000000000 +0100 +@@ -293,8 +293,8 @@ + + + # Dump all headers +-macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" +-macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" ++macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> ++macro pager p <display-toggle-weed><print-message><display-toggle-weed> + + + At first, the macro switches to the mode where all headers are +diff -urNad muttprint-0.73~/doc/manual/es/manual-es.sgml muttprint-0.73/doc/manual/es/manual-es.sgml +--- muttprint-0.73~/doc/manual/es/manual-es.sgml 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/es/manual-es.sgml 2008-12-29 23:22:09.000000000 +0100 +@@ -254,8 +254,8 @@ + + + # generar todas las cabeceras +-macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" +-macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" ++macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> ++macro pager p <display-toggle-weed><print-message><display-toggle-weed> + + + primero, el macro cambia al modo donde todas las cabeceras +diff -urNad muttprint-0.73~/doc/manual/it/manual-it.sgml muttprint-0.73/doc/manual/it/manual-it.sgml +--- muttprint-0.73~/doc/manual/it/manual-it.sgml 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/it/manual-it.sgml 2008-12-29 23:21:52.000000000 +0100 +@@ -238,8 +238,8 @@ + + + # Prendi tutti gli headers +-macro index p "<display-toggle-weed> <print-message> <display-toggle-weed>" +-macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" ++macro index p <display-toggle-weed><print-message><display-toggle-weed> ++macro pager p <display-toggle-weed><print-message><display-toggle-weed> + + + Innanzitutto la macro passa al modo in +diff -urNad muttprint-0.73~/doc/manual/sl/manual-sl.sgml muttprint-0.73/doc/manual/sl/manual-sl.sgml +--- muttprint-0.73~/doc/manual/sl/manual-sl.sgml 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/sl/manual-sl.sgml 2008-12-29 23:21:52.000000000 +0100 +@@ -245,8 +245,8 @@ + + + # Ignoriraj celo glavo +-macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" +-macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" ++macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> ++macro pager p <display-toggle-weed><print-message><display-toggle-weed> + + + Na začetku makro zamenja stanje, kjer so vsi deli glave vidni diff -rupN orig/debian/patches/11_right_docbook-utils_flags.dpatch new/debian/patches/11_right_docbook-utils_flags.dpatch --- orig/debian/patches/11_right_docbook-utils_flags.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/11_right_docbook-utils_flags.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,167 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 11_right_docbook-utils_flags.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad muttprint-0.73~/doc/manual/de/Makefile.am muttprint-0.73/doc/manual/de/Makefile.am +--- muttprint-0.73~/doc/manual/de/Makefile.am 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/de/Makefile.am 2008-12-29 23:21:12.000000000 +0100 +@@ -18,23 +18,23 @@ + $(do_subst) < $(srcdir)/manual-de.sgml > manual-de-sed.sgml + + manual-de.pdf : manual-de-sed.sgml +- db2pdf -s ../stylesheet.dsl manual-de-sed.sgml ++ db2pdf -d ../stylesheet.dsl manual-de-sed.sgml + mv manual-de-sed.pdf manual-de.pdf + + manual-de.ps : manual-de-sed.sgml +- db2ps -s ../stylesheet.dsl manual-de-sed.sgml ++ db2ps -d ../stylesheet.dsl manual-de-sed.sgml + mv manual-de-sed.ps manual-de.ps + + manual-de.dvi : manual-de-sed.sgml +- db2dvi -s ../stylesheet.dsl manual-de-sed.sgml ++ db2dvi -d ../stylesheet.dsl manual-de-sed.sgml + mv manual-de-sed.dvi manual-de.dvi + + manual-de.rtf : manual-de-sed.sgml +- db2rtf -s ../stylesheet.dsl manual-de-sed.sgml ++ db2rtf -d ../stylesheet.dsl manual-de-sed.sgml + mv manual-de-sed.rtf manual-de.rtf + + manual-de.html : manual-de-sed.sgml +- db2html -u -s ../stylesheet.dsl manual-de-sed.sgml ++ db2html -u -d ../stylesheet.dsl manual-de-sed.sgml + mv manual-de-sed/manual-de-sed.html manual-de.html + rm -rf manual-de-sed + rm -rf manual-de-sed.junk +diff -urNad muttprint-0.73~/doc/manual/en/Makefile.am muttprint-0.73/doc/manual/en/Makefile.am +--- muttprint-0.73~/doc/manual/en/Makefile.am 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/en/Makefile.am 2008-12-29 23:21:12.000000000 +0100 +@@ -18,23 +18,23 @@ + $(do_subst) < $(srcdir)/manual-en.sgml > manual-en-sed.sgml + + manual-en.pdf : manual-en-sed.sgml +- db2pdf -s ../stylesheet.dsl manual-en-sed.sgml ++ db2pdf -d ../stylesheet.dsl manual-en-sed.sgml + mv manual-en-sed.pdf manual-en.pdf + + manual-en.ps : manual-en-sed.sgml +- db2ps -s ../stylesheet.dsl manual-en-sed.sgml ++ db2ps -d ../stylesheet.dsl manual-en-sed.sgml + mv manual-en-sed.ps manual-en.ps + + manual-en.dvi : manual-en-sed.sgml +- db2dvi -s ../stylesheet.dsl manual-en-sed.sgml ++ db2dvi -d ../stylesheet.dsl manual-en-sed.sgml + mv manual-en-sed.dvi manual-en.dvi + + manual-en.rtf : manual-en-sed.sgml +- db2rtf -s ../stylesheet.dsl manual-en-sed.sgml ++ db2rtf -d ../stylesheet.dsl manual-en-sed.sgml + mv manual-en-sed.rtf manual-en.rtf + + manual-en.html : manual-en-sed.sgml +- db2html -u -s ../stylesheet.dsl manual-en-sed.sgml ++ db2html -u -d ../stylesheet.dsl manual-en-sed.sgml + mv manual-en-sed/manual-en-sed.html manual-en.html + rm -rf manual-en-sed + rm -rf manual-en-sed.junk +diff -urNad muttprint-0.73~/doc/manual/es/Makefile.am muttprint-0.73/doc/manual/es/Makefile.am +--- muttprint-0.73~/doc/manual/es/Makefile.am 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manual/es/Makefile.am 2008-12-29 23:21:34.000000000 +0100 +@@ -18,23 +18,23 @@ + $(do_subst) < $(srcdir)/manual-es.sgml > manual-es-sed.sgml + + manual-es.pdf : manual-es-sed.sgml +- db2pdf -s ../stylesheet.dsl manual-es-sed.sgml ++ db2pdf -d ../stylesheet.dsl manual-es-sed.sgml + mv manual-es-sed.pdf manual-es.pdf + + manual-es.ps : manual-es-sed.sgml +- db2ps -s ../stylesheet.dsl manual-es-sed.sgml ++ db2ps -d ../stylesheet.dsl manual-es-sed.sgml + mv manual-es-sed.ps manual-es.ps + + manual-es.dvi : manual-es-sed.sgml +- db2dvi -s ../stylesheet.dsl manual-es-sed.sgml ++ db2dvi -d ../stylesheet.dsl manual-es-sed.sgml + mv manual-es-sed.dvi manual-es.dvi + + manual-es.rtf : manual-es-sed.sgml +- db2rtf -s ../stylesheet.dsl manual-es-sed.sgml ++ db2rtf -d ../stylesheet.dsl manual-es-sed.sgml + mv manual-es-sed.rtf manual-es.rtf + + manual-es.html : manual-es-sed.sgml +- db2html -u -s ../stylesheet.dsl manual-es-sed.sgml ++ db2html -u -d ../stylesheet.dsl manual-es-sed.sgml + mv manual-es-sed/manual-es-sed.html manual-es.html + rm -rf manual-es-sed + rm -rf manual-es-sed.junk +diff -urNad muttprint-0.73~/doc/manual/it/Makefile.am muttprint-0.73/doc/manual/it/Makefile.am +--- muttprint-0.73~/doc/manual/it/Makefile.am 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/it/Makefile.am 2008-12-29 23:21:12.000000000 +0100 +@@ -18,23 +18,23 @@ + $(do_subst) < $(srcdir)/manual-it.sgml > manual-it-sed.sgml + + manual-it.pdf : manual-it-sed.sgml +- db2pdf -s ../stylesheet.dsl manual-it-sed.sgml ++ db2pdf -d ../stylesheet.dsl manual-it-sed.sgml + mv manual-it-sed.pdf manual-it.pdf + + manual-it.ps : manual-it-sed.sgml +- db2ps -s ../stylesheet.dsl manual-it-sed.sgml ++ db2ps -d ../stylesheet.dsl manual-it-sed.sgml + mv manual-it-sed.ps manual-it.ps + + manual-it.dvi : manual-it-sed.sgml +- db2dvi -s ../stylesheet.dsl manual-it-sed.sgml ++ db2dvi -d ../stylesheet.dsl manual-it-sed.sgml + mv manual-it-sed.dvi manual-it.dvi + + manual-it.rtf : manual-it-sed.sgml +- db2rtf -s ../stylesheet.dsl manual-it-sed.sgml ++ db2rtf -d ../stylesheet.dsl manual-it-sed.sgml + mv manual-it-sed.rtf manual-it.rtf + + manual-it.html : manual-it-sed.sgml +- db2html -u -s ../stylesheet.dsl manual-it-sed.sgml ++ db2html -u -d ../stylesheet.dsl manual-it-sed.sgml + mv manual-it-sed/manual-it-sed.html manual-it.html + rm -rf manual-it-sed + rm -rf manual-it-sed.junk +diff -urNad muttprint-0.73~/doc/manual/sl/Makefile.am muttprint-0.73/doc/manual/sl/Makefile.am +--- muttprint-0.73~/doc/manual/sl/Makefile.am 2008-12-29 23:19:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/sl/Makefile.am 2008-12-29 23:21:12.000000000 +0100 +@@ -18,23 +18,23 @@ + $(do_subst) < $(srcdir)/manual-sl.sgml > manual-sl-sed.sgml + + manual-sl.pdf : manual-sl-sed.sgml +- db2pdf -s ../stylesheet.dsl manual-sl-sed.sgml ++ db2pdf -d ../stylesheet.dsl manual-sl-sed.sgml + mv manual-sl-sed.pdf manual-sl.pdf + + manual-sl.ps : manual-sl-sed.sgml +- db2ps -s ../stylesheet.dsl manual-sl-sed.sgml ++ db2ps -d ../stylesheet.dsl manual-sl-sed.sgml + mv manual-sl-sed.ps manual-sl.ps + + manual-sl.dvi : manual-sl-sed.sgml +- db2dvi -s ../stylesheet.dsl manual-sl-sed.sgml ++ db2dvi -d ../stylesheet.dsl manual-sl-sed.sgml + mv manual-sl-sed.dvi manual-sl.dvi + + manual-sl.rtf : manual-sl-sed.sgml +- db2rtf -s ../stylesheet.dsl manual-sl-sed.sgml ++ db2rtf -d ../stylesheet.dsl manual-sl-sed.sgml + mv manual-sl-sed.rtf manual-sl.rtf + + manual-sl.html : manual-sl-sed.sgml +- db2html -u -s ../stylesheet.dsl manual-sl-sed.sgml ++ db2html -u -d ../stylesheet.dsl manual-sl-sed.sgml + mv manual-sl-sed/manual-sl-sed.html manual-sl.html + rm -rf manual-sl-sed + rm -rf manual-sl-sed.junk diff -rupN orig/debian/patches/12_no_html_docs.dpatch new/debian/patches/12_no_html_docs.dpatch --- orig/debian/patches/12_no_html_docs.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/12_no_html_docs.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,67 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 12_no_html_docs.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad muttprint-0.73~/doc/manual/de/Makefile.am muttprint-0.73/doc/manual/de/Makefile.am +--- muttprint-0.73~/doc/manual/de/Makefile.am 2008-12-29 23:20:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/de/Makefile.am 2008-12-29 23:20:51.000000000 +0100 +@@ -9,7 +9,7 @@ + + if DOCBOOK + doc_DATA = manual-de.pdf manual-de.ps manual-de.dvi \ +- manual-de.rtf manual-de.html ++ manual-de.rtf + else + doc_DATA = + endif +diff -urNad muttprint-0.73~/doc/manual/en/Makefile.am muttprint-0.73/doc/manual/en/Makefile.am +--- muttprint-0.73~/doc/manual/en/Makefile.am 2008-12-29 23:20:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/en/Makefile.am 2008-12-29 23:20:51.000000000 +0100 +@@ -9,7 +9,7 @@ + + if DOCBOOK + doc_DATA = manual-en.pdf manual-en.ps manual-en.dvi \ +- manual-en.rtf manual-en.html ++ manual-en.rtf + else + doc_DATA = + endif +diff -urNad muttprint-0.73~/doc/manual/es/Makefile.am muttprint-0.73/doc/manual/es/Makefile.am +--- muttprint-0.73~/doc/manual/es/Makefile.am 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manual/es/Makefile.am 2008-12-29 23:21:05.000000000 +0100 +@@ -9,7 +9,7 @@ + + if DOCBOOK + doc_DATA = manual-es.pdf manual-es.ps manual-es.dvi \ +- manual-es.rtf manual-es.html ++ manual-es.rtf + else + doc_DATA = + endif +diff -urNad muttprint-0.73~/doc/manual/it/Makefile.am muttprint-0.73/doc/manual/it/Makefile.am +--- muttprint-0.73~/doc/manual/it/Makefile.am 2008-12-29 23:20:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/it/Makefile.am 2008-12-29 23:20:51.000000000 +0100 +@@ -9,7 +9,7 @@ + + if DOCBOOK + doc_DATA = manual-it.pdf manual-it.ps manual-it.dvi \ +- manual-it.rtf manual-it.html ++ manual-it.rtf + else + doc_DATA = + endif +diff -urNad muttprint-0.73~/doc/manual/sl/Makefile.am muttprint-0.73/doc/manual/sl/Makefile.am +--- muttprint-0.73~/doc/manual/sl/Makefile.am 2008-12-29 23:20:51.000000000 +0100 ++++ muttprint-0.73/doc/manual/sl/Makefile.am 2008-12-29 23:20:51.000000000 +0100 +@@ -9,7 +9,7 @@ + + if DOCBOOK + doc_DATA = manual-sl.pdf manual-sl.ps manual-sl.dvi \ +- manual-sl.rtf manual-sl.html ++ manual-sl.rtf + else + doc_DATA = + endif diff -rupN orig/debian/patches/14_point_to_ospics.dpatch new/debian/patches/14_point_to_ospics.dpatch --- orig/debian/patches/14_point_to_ospics.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/14_point_to_ospics.dpatch 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1,103 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 14_point_to_ospics.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: The images get moved to ospics + +@DPATCH@ +diff -urNad muttprint-0.73~/doc/manpages/de/muttprint.pod muttprint-0.73/doc/manpages/de/muttprint.pod +--- muttprint-0.73~/doc/manpages/de/muttprint.pod 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manpages/de/muttprint.pod 2008-12-29 18:13:33.000000000 +0100 +@@ -377,7 +377,7 @@ + Dokumentation in verschiedenen Sprachen und Formaten. + + +-=item F<##SHAREDIR##/muttprint/> ++=item F<##SHAREDIR##/ospics/> + + Einige Bilder, die für den Druck auf der erste Seite der Mail verwendet werden + können. +diff -urNad muttprint-0.73~/doc/manpages/en/muttprint.pod muttprint-0.73/doc/manpages/en/muttprint.pod +--- muttprint-0.73~/doc/manpages/en/muttprint.pod 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manpages/en/muttprint.pod 2008-12-29 18:13:33.000000000 +0100 +@@ -375,7 +375,7 @@ + B manual files in different languages and formats. + + +-=item F<##SHAREDIR##/muttprint/> ++=item F<##SHAREDIR##/ospics/> + + Some pictures which can be used for printing on the + first page of your mail. +diff -urNad muttprint-0.73~/doc/manpages/es/muttprint.pod muttprint-0.73/doc/manpages/es/muttprint.pod +--- muttprint-0.73~/doc/manpages/es/muttprint.pod 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manpages/es/muttprint.pod 2008-12-29 18:13:33.000000000 +0100 +@@ -357,7 +357,7 @@ + Manuales de B en diferentes idiomas y formatos. + + +-=item F<##SHAREDIR##/muttprint/> ++=item F<##SHAREDIR##/ospics/> + + Algunas imágenes que pueden utilizarse para ser impresas en la + primera página de tu mensaje de correo. +diff -urNad muttprint-0.73~/doc/manpages/it/muttprint.pod muttprint-0.73/doc/manpages/it/muttprint.pod +--- muttprint-0.73~/doc/manpages/it/muttprint.pod 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/doc/manpages/it/muttprint.pod 2008-12-29 18:13:33.000000000 +0100 +@@ -377,7 +377,7 @@ + + Manuali di B in diversi formati e lingue. + +-=item F<##SHAREDIR##/muttprint/> ++=item F<##SHAREDIR##/ospics/> + + Alcune immagini che possono essere stampate sulla prima + pagina della tua posta. +diff -urNad muttprint-0.73~/doc/manual/de/manual-de.sgml muttprint-0.73/doc/manual/de/manual-de.sgml +--- muttprint-0.73~/doc/manual/de/manual-de.sgml 2005-05-16 14:38:51.000000000 +0200 ++++ muttprint-0.73/doc/manual/de/manual-de.sgml 2008-12-29 18:13:33.000000000 +0100 +@@ -581,7 +581,7 @@ + + Zusätzlich werden noch Beispielbilder mitgeliefert, die schon + in das EPS-Format konvertiert vorliegen. Sie befinden sich nach der +- Installation in ##SHAREDIR##/muttprint. ++ Installation in ##SHAREDIR##/ospics. + + Soll der Druck der Grafik ganz ausgeschaltet werden, so kann + PENGUIN auf den Wert off +diff -urNad muttprint-0.73~/doc/manual/en/manual-en.sgml muttprint-0.73/doc/manual/en/manual-en.sgml +--- muttprint-0.73~/doc/manual/en/manual-en.sgml 2005-05-16 14:38:51.000000000 +0200 ++++ muttprint-0.73/doc/manual/en/manual-en.sgml 2008-12-29 18:13:33.000000000 +0100 +@@ -550,7 +550,7 @@ + + Additionally, Muttprint comes with some example pictures that + are already converted into the EPS format. After the installation, +- you'll find this in ##SHAREDIR##/muttprint. ++ you'll find this in ##SHAREDIR##/ospics. + + If the printing of the graphic should turned off, + set PENGUIN to the value off. +diff -urNad muttprint-0.73~/doc/manual/es/manual-es.sgml muttprint-0.73/doc/manual/es/manual-es.sgml +--- muttprint-0.73~/doc/manual/es/manual-es.sgml 2005-05-16 14:38:51.000000000 +0200 ++++ muttprint-0.73/doc/manual/es/manual-es.sgml 2008-12-29 18:13:33.000000000 +0100 +@@ -501,7 +501,7 @@ + Además, Muttprint viene con algunas imágenes + de ejemplo que están ya convertidas al formato EPS. + Después de la instalación, las encontrarás en +- ##SHAREDIR##/muttprint. ++ ##SHAREDIR##/ospics. + + Si quieres la impresión de la imágen + desactivada, define PENGUIN con el valor +diff -urNad muttprint-0.73~/doc/manual/sl/manual-sl.sgml muttprint-0.73/doc/manual/sl/manual-sl.sgml +--- muttprint-0.73~/doc/manual/sl/manual-sl.sgml 2005-05-16 14:38:51.000000000 +0200 ++++ muttprint-0.73/doc/manual/sl/manual-sl.sgml 2008-12-29 18:13:33.000000000 +0100 +@@ -510,7 +510,7 @@ + + Poleg tega pri Muttprint-u najdete tudi dodatne primere slik + ki so že spremenjene v EPS format. Po namestitvi jih +- boste našli v ##SHAREDIR##/muttprint. ++ boste našli v ##SHAREDIR##/ospics. + + Če naj bi bilo tiskanje slik izklopljeno nastavite + vrednost PENGUIN na off. diff -rupN orig/debian/patches/15_no_Gentoo.dpatch new/debian/patches/15_no_Gentoo.dpatch --- orig/debian/patches/15_no_Gentoo.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/15_no_Gentoo.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,21 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 15_no_Gentoo.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: we don't need the Gentoo pictures + +@DPATCH@ +diff -urNad muttprint-0.73~/pics/Makefile.am muttprint-0.73/pics/Makefile.am +--- muttprint-0.73~/pics/Makefile.am 2006-05-06 09:13:46.000000000 +0200 ++++ muttprint-0.73/pics/Makefile.am 2008-12-29 18:22:12.000000000 +0100 +@@ -7,10 +7,6 @@ + Debian_color.png \ + Debian.eps \ + Debian.png \ +- Gentoo_color.eps \ +- Gentoo_color.png \ +- Gentoo.eps \ +- Gentoo.png \ + penguin.eps \ + penguin.jpg \ + README.pics diff -rupN orig/debian/patches/16_dont_install_README.dpatch new/debian/patches/16_dont_install_README.dpatch --- orig/debian/patches/16_dont_install_README.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/16_dont_install_README.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,17 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 16__dont_install_REAME.dpatch by Rene Engelhard +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: we don't need README.pics being installed... + +@DPATCH@ +diff -urNad muttprint-0.73~/pics/Makefile.am muttprint-0.73/pics/Makefile.am +--- muttprint-0.73~/pics/Makefile.am 2008-12-29 20:23:16.000000000 +0100 ++++ muttprint-0.73/pics/Makefile.am 2008-12-29 20:24:01.000000000 +0100 +@@ -12,5 +12,4 @@ + Debian.eps \ + Debian.png \ + penguin.eps \ +- penguin.jpg \ +- README.pics ++ penguin.jpg diff -rupN orig/debian/patches/17_leave_tmp_dir.dpatch new/debian/patches/17_leave_tmp_dir.dpatch --- orig/debian/patches/17_leave_tmp_dir.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/17_leave_tmp_dir.dpatch 2013-06-07 10:38:04.063090487 +0200 @@ -0,0 +1,33 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 16_leave_tmp_dir.dpatch by +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: cannot remove path when cwd is /tmp/muttprint* +## DP: Author: martin f krafft +## DP: http://bugs.debian.org/551543 + +@DPATCH@ +diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' muttprint-0.73~/muttprint muttprint-0.73/muttprint +--- muttprint-0.73~/muttprint 2008-12-26 01:33:36.000000000 +0100 ++++ muttprint-0.73/muttprint 2010-11-27 19:08:51.000000000 +0100 +@@ -740,6 +740,8 @@ + } + } + ++chdir($ENV{HOME}) || chdir('/'); ++ + ################################### ENDE #################################### + + +--- muttprint-0.73~/muttprint 2010-12-15 15:54:24.000000000 +0100 ++++ muttprint-0.73/muttprint 2010-12-15 15:55:12.000000000 +0100 +@@ -1791,6 +1791,9 @@ + output \*STDERR, $messageString; + } + } ++ ++ chdir($ENV{HOME}) || chdir('/'); ++ + exit 1; + } + diff -rupN orig/debian/patches/18_pod2man_de_utf8.dpatch new/debian/patches/18_pod2man_de_utf8.dpatch --- orig/debian/patches/18_pod2man_de_utf8.dpatch 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/patches/18_pod2man_de_utf8.dpatch 2013-06-07 10:38:04.069757118 +0200 @@ -0,0 +1,19 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 18_pod2man_de_utf8.diff.dpatch by +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +@DPATCH@ +diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' muttprint-0.73~/doc/manpages/de/Makefile.am muttprint-0.73/doc/manpages/de/Makefile.am +--- muttprint-0.73~/doc/manpages/de/Makefile.am 2006-05-06 07:13:46.000000000 +0000 ++++ muttprint-0.73/doc/manpages/de/Makefile.am 2012-02-10 20:15:43.000000000 +0000 +@@ -16,7 +16,7 @@ + + muttprint.1 : muttprint.pod + $(do_subst) $(srcdir)/muttprint.pod > muttprint +- pod2man --center="Muttprint Kurzanleitung" muttprint muttprint.1 ++ pod2man --utf8 --error=stderr --center="Muttprint Kurzanleitung" muttprint muttprint.1 + rm muttprint + + EXTRA_DIST = muttprint.pod diff -rupN orig/debian/rules new/debian/rules --- orig/debian/rules 1970-01-01 01:00:00.000000000 +0100 +++ new/debian/rules 2013-06-07 10:38:04.059757172 +0200 @@ -0,0 +1,108 @@ +#!/usr/bin/make -f + +include /usr/share/dpatch/dpatch.make + +configure: configure-stamp +configure-stamp: patch-stamp + dh_testdir + + aclocal-1.9 + automake-1.9 --add-missing --copy + autoconf + + ./configure --bindir=/usr/bin --sysconfdir=/etc --docdir=/usr/share/doc \ + --libdir=/usr/lib --prefix=/usr + + touch configure-stamp + +build: configure-stamp build-stamp +build-stamp: + dh_testdir + + # convert images (and make pics/ build work) + cd pics && \ + for i in BabyTuX_color.eps BabyTuX.eps Debian_color.eps Debian.eps; do \ + convert $$i `basename $$i .eps`.png; \ + done && \ + convert penguin.eps penguin.jpg + + $(MAKE) + + touch build-stamp + +clean: unpatch + dh_testdir + dh_testroot + + [ ! -f Makefile ] || $(MAKE) distclean + cd pics && \ + for i in BabyTuX_color.eps BabyTuX.eps Debian_color.eps Debian.eps; do \ + rm -f `basename $$i .eps`.png; \ + done && \ + rm -f penguin.jpg + + rm -f config.log config.status aclocal.m4 configure + rm -f missing install-sh depcomp + -find . -name "Makefile.in" | xargs rm + -find . -name "Makefile" | xargs rm + + rm -f configure-stamp build-stamp + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + $(MAKE) install DESTDIR=$(CURDIR)/debian/muttprint + + # install default /etc/Muttprintrc + cp $(CURDIR)/debian/Muttprintrc \ + $(CURDIR)/debian/muttprint/etc/Muttprintrc + + # move the images to ospics ... + mv debian/muttprint/usr/share/muttprint \ + $(CURDIR)/debian/ospics/usr/share/ && \ + cd debian/ospics/usr/share && mv muttprint ospics + + # flip the BabyTux PNG + cd $(CURDIR)/debian/ospics/usr/share/ospics && \ + convert -flop BabyTuX.png BabyTuX_flip.png + + # move the translations back + # yes, this way is ugly but easy ;) + mkdir $(CURDIR)/debian/muttprint/usr/share/muttprint + mv $(CURDIR)/debian/ospics/usr/share/ospics/translations \ + $(CURDIR)/debian/muttprint/usr/share/muttprint + + # move the manual into muttprint-manual + cd $(CURDIR)/debian/muttprint/usr/share/doc/muttprint && \ + mv manual* \ + $(CURDIR)/debian/muttprint-manual/usr/share/doc/muttprint/manual + + # remove muttprint-langinfo stuff + rm -f $(CURDIR)/debian/muttprint/usr/bin/muttprint-langinfo + +binary-indep: build install + dh_testdir + dh_testroot + dh_installdocs + dh_installchangelogs ChangeLog + dh_installdebconf + dh_compress + dh_fixperms + dh_installdeb + dh_perl muttprint + dh_gencontrol + dh_md5sums + dh_builddeb + +#binary-arch: build install +# dh_testdir + +#binary: binary-indep binary-arch +binary: binary-indep + +.PHONY: build clean binary-indep binary-arch binary install configure diff -rupN orig/doc/manpages/de/Makefile.am new/doc/manpages/de/Makefile.am --- orig/doc/manpages/de/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manpages/de/Makefile.am 2013-06-07 10:38:04.089757009 +0200 @@ -16,7 +16,7 @@ endif muttprint.1 : muttprint.pod $(do_subst) $(srcdir)/muttprint.pod > muttprint - pod2man --center="Muttprint Kurzanleitung" muttprint muttprint.1 + pod2man --utf8 --error=stderr --center="Muttprint Kurzanleitung" muttprint muttprint.1 rm muttprint EXTRA_DIST = muttprint.pod diff -rupN orig/doc/manpages/en/Makefile.am new/doc/manpages/en/Makefile.am --- orig/doc/manpages/en/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manpages/en/Makefile.am 2013-06-07 10:38:51.469500331 +0200 @@ -15,7 +15,7 @@ endif muttprint.1 : muttprint.pod $(do_subst) $(srcdir)/muttprint.pod > muttprint - pod2man --center="Muttprint Short Manual" muttprint muttprint.1 + pod2man --utf8 --error=stderr --center="Muttprint Short Manual" muttprint muttprint.1 rm muttprint EXTRA_DIST = muttprint.pod diff -rupN orig/doc/manpages/es/Makefile.am new/doc/manpages/es/Makefile.am --- orig/doc/manpages/es/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manpages/es/Makefile.am 2013-06-07 10:39:05.116093068 +0200 @@ -16,7 +16,7 @@ endif muttprint.1 : muttprint.pod $(do_subst) $(srcdir)/muttprint.pod > muttprint - pod2man --center="Manual Corto de Muttprint" muttprint muttprint.1 + pod2man --utf8 --error=stderr --center="Manual Corto de Muttprint" muttprint muttprint.1 rm muttprint EXTRA_DIST = muttprint.pod diff -rupN orig/doc/manpages/it/Makefile.am new/doc/manpages/it/Makefile.am --- orig/doc/manpages/it/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manpages/it/Makefile.am 2013-06-07 10:39:18.916018307 +0200 @@ -16,7 +16,7 @@ endif muttprint.1 : muttprint.pod $(do_subst) $(srcdir)/muttprint.pod > muttprint - pod2man --center="Breve manuale di Muttprint" muttprint muttprint.1 + pod2man --utf8 --error=stderr --center="Breve manuale di Muttprint" muttprint muttprint.1 rm muttprint EXTRA_DIST = muttprint.pod diff -rupN orig/doc/manual/de/Makefile.am new/doc/manual/de/Makefile.am --- orig/doc/manual/de/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manual/de/Makefile.am 2013-06-07 10:38:04.083090379 +0200 @@ -9,7 +9,7 @@ do_subst = sed -e 's,\#\#DOCDIR\#\#,$(do if DOCBOOK doc_DATA = manual-de.pdf manual-de.ps manual-de.dvi \ - manual-de.rtf manual-de.html + manual-de.rtf else doc_DATA = endif @@ -18,23 +18,23 @@ manual-de-sed.sgml : manual-de.sgml $(do_subst) < $(srcdir)/manual-de.sgml > manual-de-sed.sgml manual-de.pdf : manual-de-sed.sgml - db2pdf -s ../stylesheet.dsl manual-de-sed.sgml + db2pdf -d ../stylesheet.dsl manual-de-sed.sgml mv manual-de-sed.pdf manual-de.pdf manual-de.ps : manual-de-sed.sgml - db2ps -s ../stylesheet.dsl manual-de-sed.sgml + db2ps -d ../stylesheet.dsl manual-de-sed.sgml mv manual-de-sed.ps manual-de.ps manual-de.dvi : manual-de-sed.sgml - db2dvi -s ../stylesheet.dsl manual-de-sed.sgml + db2dvi -d ../stylesheet.dsl manual-de-sed.sgml mv manual-de-sed.dvi manual-de.dvi manual-de.rtf : manual-de-sed.sgml - db2rtf -s ../stylesheet.dsl manual-de-sed.sgml + db2rtf -d ../stylesheet.dsl manual-de-sed.sgml mv manual-de-sed.rtf manual-de.rtf manual-de.html : manual-de-sed.sgml - db2html -u -s ../stylesheet.dsl manual-de-sed.sgml + db2html -u -d ../stylesheet.dsl manual-de-sed.sgml mv manual-de-sed/manual-de-sed.html manual-de.html rm -rf manual-de-sed rm -rf manual-de-sed.junk diff -rupN orig/doc/manual/de/manual-de.sgml new/doc/manual/de/manual-de.sgml --- orig/doc/manual/de/manual-de.sgml 2005-05-16 14:38:51.000000000 +0200 +++ new/doc/manual/de/manual-de.sgml 2013-06-07 10:38:04.076423748 +0200 @@ -312,8 +312,8 @@ muttprint-Version # Alle Header sollen an Muttprint �bergeben werden -macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" -macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" +macro index p "<display-toggle-weed><print-message><display-toggle-weed><exit>" +macro pager p "<display-toggle-weed><print-message><display-toggle-weed>" Das Makro schaltet zunächst auf Anzeige aller Header um, diff -rupN orig/doc/manual/en/Makefile.am new/doc/manual/en/Makefile.am --- orig/doc/manual/en/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manual/en/Makefile.am 2013-06-07 10:38:04.083090379 +0200 @@ -9,7 +9,7 @@ do_subst = sed -e 's,\#\#DOCDIR\#\#,$(do if DOCBOOK doc_DATA = manual-en.pdf manual-en.ps manual-en.dvi \ - manual-en.rtf manual-en.html + manual-en.rtf else doc_DATA = endif @@ -18,23 +18,23 @@ manual-en-sed.sgml : manual-en.sgml $(do_subst) < $(srcdir)/manual-en.sgml > manual-en-sed.sgml manual-en.pdf : manual-en-sed.sgml - db2pdf -s ../stylesheet.dsl manual-en-sed.sgml + db2pdf -d ../stylesheet.dsl manual-en-sed.sgml mv manual-en-sed.pdf manual-en.pdf manual-en.ps : manual-en-sed.sgml - db2ps -s ../stylesheet.dsl manual-en-sed.sgml + db2ps -d ../stylesheet.dsl manual-en-sed.sgml mv manual-en-sed.ps manual-en.ps manual-en.dvi : manual-en-sed.sgml - db2dvi -s ../stylesheet.dsl manual-en-sed.sgml + db2dvi -d ../stylesheet.dsl manual-en-sed.sgml mv manual-en-sed.dvi manual-en.dvi manual-en.rtf : manual-en-sed.sgml - db2rtf -s ../stylesheet.dsl manual-en-sed.sgml + db2rtf -d ../stylesheet.dsl manual-en-sed.sgml mv manual-en-sed.rtf manual-en.rtf manual-en.html : manual-en-sed.sgml - db2html -u -s ../stylesheet.dsl manual-en-sed.sgml + db2html -u -d ../stylesheet.dsl manual-en-sed.sgml mv manual-en-sed/manual-en-sed.html manual-en.html rm -rf manual-en-sed rm -rf manual-en-sed.junk diff -rupN orig/doc/manual/en/manual-en.sgml new/doc/manual/en/manual-en.sgml --- orig/doc/manual/en/manual-en.sgml 2005-05-16 14:38:51.000000000 +0200 +++ new/doc/manual/en/manual-en.sgml 2013-06-07 10:38:04.079757064 +0200 @@ -293,8 +293,8 @@ muttprint-Version # Dump all headers -macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" -macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" +macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> +macro pager p <display-toggle-weed><print-message><display-toggle-weed> At first, the macro switches to the mode where all headers are diff -rupN orig/doc/manual/es/Makefile.am new/doc/manual/es/Makefile.am --- orig/doc/manual/es/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manual/es/Makefile.am 2013-06-07 10:38:04.083090379 +0200 @@ -9,7 +9,7 @@ do_subst = sed -e 's,\#\#DOCDIR\#\#,$(do if DOCBOOK doc_DATA = manual-es.pdf manual-es.ps manual-es.dvi \ - manual-es.rtf manual-es.html + manual-es.rtf else doc_DATA = endif @@ -18,23 +18,23 @@ manual-es-sed.sgml : manual-es.sgml $(do_subst) < $(srcdir)/manual-es.sgml > manual-es-sed.sgml manual-es.pdf : manual-es-sed.sgml - db2pdf -s ../stylesheet.dsl manual-es-sed.sgml + db2pdf -d ../stylesheet.dsl manual-es-sed.sgml mv manual-es-sed.pdf manual-es.pdf manual-es.ps : manual-es-sed.sgml - db2ps -s ../stylesheet.dsl manual-es-sed.sgml + db2ps -d ../stylesheet.dsl manual-es-sed.sgml mv manual-es-sed.ps manual-es.ps manual-es.dvi : manual-es-sed.sgml - db2dvi -s ../stylesheet.dsl manual-es-sed.sgml + db2dvi -d ../stylesheet.dsl manual-es-sed.sgml mv manual-es-sed.dvi manual-es.dvi manual-es.rtf : manual-es-sed.sgml - db2rtf -s ../stylesheet.dsl manual-es-sed.sgml + db2rtf -d ../stylesheet.dsl manual-es-sed.sgml mv manual-es-sed.rtf manual-es.rtf manual-es.html : manual-es-sed.sgml - db2html -u -s ../stylesheet.dsl manual-es-sed.sgml + db2html -u -d ../stylesheet.dsl manual-es-sed.sgml mv manual-es-sed/manual-es-sed.html manual-es.html rm -rf manual-es-sed rm -rf manual-es-sed.junk diff -rupN orig/doc/manual/es/manual-es.sgml new/doc/manual/es/manual-es.sgml --- orig/doc/manual/es/manual-es.sgml 2005-05-16 14:38:51.000000000 +0200 +++ new/doc/manual/es/manual-es.sgml 2013-06-07 10:38:04.079757064 +0200 @@ -254,8 +254,8 @@ muttprint-versión # generar todas las cabeceras -macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" -macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" +macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> +macro pager p <display-toggle-weed><print-message><display-toggle-weed> primero, el macro cambia al modo donde todas las cabeceras diff -rupN orig/doc/manual/it/Makefile.am new/doc/manual/it/Makefile.am --- orig/doc/manual/it/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manual/it/Makefile.am 2013-06-07 10:38:04.083090379 +0200 @@ -9,7 +9,7 @@ do_subst = sed -e 's,\#\#DOCDIR\#\#,$(do if DOCBOOK doc_DATA = manual-it.pdf manual-it.ps manual-it.dvi \ - manual-it.rtf manual-it.html + manual-it.rtf else doc_DATA = endif @@ -18,23 +18,23 @@ manual-it-sed.sgml : manual-it.sgml $(do_subst) < $(srcdir)/manual-it.sgml > manual-it-sed.sgml manual-it.pdf : manual-it-sed.sgml - db2pdf -s ../stylesheet.dsl manual-it-sed.sgml + db2pdf -d ../stylesheet.dsl manual-it-sed.sgml mv manual-it-sed.pdf manual-it.pdf manual-it.ps : manual-it-sed.sgml - db2ps -s ../stylesheet.dsl manual-it-sed.sgml + db2ps -d ../stylesheet.dsl manual-it-sed.sgml mv manual-it-sed.ps manual-it.ps manual-it.dvi : manual-it-sed.sgml - db2dvi -s ../stylesheet.dsl manual-it-sed.sgml + db2dvi -d ../stylesheet.dsl manual-it-sed.sgml mv manual-it-sed.dvi manual-it.dvi manual-it.rtf : manual-it-sed.sgml - db2rtf -s ../stylesheet.dsl manual-it-sed.sgml + db2rtf -d ../stylesheet.dsl manual-it-sed.sgml mv manual-it-sed.rtf manual-it.rtf manual-it.html : manual-it-sed.sgml - db2html -u -s ../stylesheet.dsl manual-it-sed.sgml + db2html -u -d ../stylesheet.dsl manual-it-sed.sgml mv manual-it-sed/manual-it-sed.html manual-it.html rm -rf manual-it-sed rm -rf manual-it-sed.junk diff -rupN orig/doc/manual/it/manual-it.sgml new/doc/manual/it/manual-it.sgml --- orig/doc/manual/it/manual-it.sgml 2005-05-16 14:38:51.000000000 +0200 +++ new/doc/manual/it/manual-it.sgml 2013-06-07 10:38:04.079757064 +0200 @@ -238,8 +238,8 @@ muttprint-Versione # Prendi tutti gli headers -macro index p "<display-toggle-weed> <print-message> <display-toggle-weed>" -macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" +macro index p <display-toggle-weed><print-message><display-toggle-weed> +macro pager p <display-toggle-weed><print-message><display-toggle-weed> Innanzitutto la macro passa al modo in diff -rupN orig/doc/manual/sl/Makefile.am new/doc/manual/sl/Makefile.am --- orig/doc/manual/sl/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/doc/manual/sl/Makefile.am 2013-06-07 10:38:04.083090379 +0200 @@ -9,7 +9,7 @@ do_subst = sed -e 's,\#\#DOCDIR\#\#,$(do if DOCBOOK doc_DATA = manual-sl.pdf manual-sl.ps manual-sl.dvi \ - manual-sl.rtf manual-sl.html + manual-sl.rtf else doc_DATA = endif @@ -18,23 +18,23 @@ manual-sl-sed.sgml : manual-sl.sgml $(do_subst) < $(srcdir)/manual-sl.sgml > manual-sl-sed.sgml manual-sl.pdf : manual-sl-sed.sgml - db2pdf -s ../stylesheet.dsl manual-sl-sed.sgml + db2pdf -d ../stylesheet.dsl manual-sl-sed.sgml mv manual-sl-sed.pdf manual-sl.pdf manual-sl.ps : manual-sl-sed.sgml - db2ps -s ../stylesheet.dsl manual-sl-sed.sgml + db2ps -d ../stylesheet.dsl manual-sl-sed.sgml mv manual-sl-sed.ps manual-sl.ps manual-sl.dvi : manual-sl-sed.sgml - db2dvi -s ../stylesheet.dsl manual-sl-sed.sgml + db2dvi -d ../stylesheet.dsl manual-sl-sed.sgml mv manual-sl-sed.dvi manual-sl.dvi manual-sl.rtf : manual-sl-sed.sgml - db2rtf -s ../stylesheet.dsl manual-sl-sed.sgml + db2rtf -d ../stylesheet.dsl manual-sl-sed.sgml mv manual-sl-sed.rtf manual-sl.rtf manual-sl.html : manual-sl-sed.sgml - db2html -u -s ../stylesheet.dsl manual-sl-sed.sgml + db2html -u -d ../stylesheet.dsl manual-sl-sed.sgml mv manual-sl-sed/manual-sl-sed.html manual-sl.html rm -rf manual-sl-sed rm -rf manual-sl-sed.junk diff -rupN orig/doc/manual/sl/manual-sl.sgml new/doc/manual/sl/manual-sl.sgml --- orig/doc/manual/sl/manual-sl.sgml 2005-05-16 14:38:51.000000000 +0200 +++ new/doc/manual/sl/manual-sl.sgml 2013-06-07 10:38:04.079757064 +0200 @@ -245,8 +245,8 @@ da napišete makro # Ignoriraj celo glavo -macro index p "<display-toggle-weed> <print-message> <display-toggle-weed> <exit>" -macro pager p "<display-toggle-weed> <print-message> <display-toggle-weed>" +macro index p <display-toggle-weed><print-message><display-toggle-weed><exit> +macro pager p <display-toggle-weed><print-message><display-toggle-weed> Na začetku makro zamenja stanje, kjer so vsi deli glave vidni diff -rupN orig/muttprint new/muttprint --- orig/muttprint 2008-12-26 01:33:36.000000000 +0100 +++ new/muttprint 2013-06-07 10:38:04.089757009 +0200 @@ -740,6 +740,8 @@ if ($Config{'PRINTER'} =~ /^(TO_FILE|fil } } +chdir($ENV{HOME}) || chdir('/'); + ################################### ENDE #################################### @@ -1791,6 +1793,9 @@ sub fatalError ($) { output \*STDERR, $messageString; } } + + chdir($ENV{HOME}) || chdir('/'); + exit 1; } diff -rupN orig/pics/Makefile.am new/pics/Makefile.am --- orig/pics/Makefile.am 2006-05-06 09:13:46.000000000 +0200 +++ new/pics/Makefile.am 2013-06-07 10:38:04.086423694 +0200 @@ -7,10 +7,5 @@ dist_pkgdata_DATA = \ Debian_color.png \ Debian.eps \ Debian.png \ - Gentoo_color.eps \ - Gentoo_color.png \ - Gentoo.eps \ - Gentoo.png \ penguin.eps \ - penguin.jpg \ - README.pics + penguin.jpg diff -rupN orig/pics/Makefile.am.orig new/pics/Makefile.am.orig --- orig/pics/Makefile.am.orig 1970-01-01 01:00:00.000000000 +0100 +++ new/pics/Makefile.am.orig 2013-06-07 10:38:04.086423694 +0200 @@ -0,0 +1,12 @@ +dist_pkgdata_DATA = \ + BabyTuX_color.eps \ + BabyTuX_color.png \ + BabyTuX.eps \ + BabyTuX.png \ + Debian_color.eps \ + Debian_color.png \ + Debian.eps \ + Debian.png \ + penguin.eps \ + penguin.jpg \ + README.pics